Purchased this EarthX recommended charger to take care of the new lithium battery. Pricey critter!
Connected the fuel supply and return lines.
They have you shove this heat shield up under the ignition coils.
And then safety wire it to this hose.
Next is to secure this heat shield in place with safety wire around the coolant distributor neck.
Numbered totally different that what the directions call out.
Unfortunately the wires are not labeled per the KAI's. I had to use a multimeter to figure out which was the correct ground on the other end.
Next they have you cut the ground wire for the starter solenoid off and cover it with heat shrink.
They have you connect all of the sensor ground wires to the ground lugs on the fuse box.
They have you temp mount the engine fuse box.
Seems they have changed from having two of the same connectors that are a different color to two totally different styles. One is now a cannon plug.
No comments:
Post a Comment