Monday, March 24, 2025

Engine mount part five!

I then swung my hanging straps around 90 degrees and pulled the fuse up close to the engine.  This allowed me to align the engine perfectly and get the bolts and isolators installed.  I did put a little bit of silicone lube on the isolators to get them to slide together easily.  I installed the bottom bolts first.


Then the top ones.  It is a tight fit on the top.  

I then torqued down the bolts per the KAI's.
Looks great hanging on the plane.  It is amazing how compact this engine is!


No comments:

Post a Comment