Fuselage center section #16 - Seat rib area prep

 After a week at Osh and another week of recovery at work and other stuff, I started back to work on the seat rib area of the fuselage last night.  Tons of little parts to cut apart and clean up on the wheel!

Cutting the seat belt anchor brackets apart.  These were steel on my RV7 so I am kinda wondering how much force these can take during an impact before ripping the bolt out.   HMMMMM.

Deburring them on the wheel.

More brackets to cut apart.

And clean up.

These are part of the seat back adjustment system.

Clean up on isle 7.

More of the seat back angle adjust latch mechanism.  These parts have been heat treated at the factory, much tougher than the other parts.

Deburr deburr deburr....