Here is the aftermath of trimming the bottom cowl.
Then on to mounting the spinner backplate and the aft side of the prop hub.
If you don't have one of these...GET ONE! They allow you to turn any wrench into a dogbone adapter for the torque wrench. As long as you keep it 90deg to the torque wrench, no math required. Worked great for getting to the nuts on the backside of the prop flange.
Next they have you fab this angle tool and drill it to the center of the front of the cowl.
And mark the center of the aft side of the top cowl.
No comments:
Post a Comment