I do plan on priming all the internal surfaces of the RV-12IS. I primed the RV-7 with several different kinds of products. Everything from waterborne to self etching rattle can. For the RV-10 it was all 2 part AKZO which is likely the best there is for the job.
That being said, I am looking for something safer to use for this project. Easy clean up is a plus. Therefore I have chosen to start the build by using Stewart System's 2 part EkoPoxy product. This product is minimally hazardous and uses waterborne technology. It has become well proven over the past several years and should serve my needs perfectly.
I picked the Zinc Chromate Green variant of their product since it should match the self etching rattle can color well enough for the occasional parts that I might use that on. Disregard the color on these pics.
As for prep, I will be using the etch and scuff with maroon Scotchbrite pad method. No hazardous Alodine will be used.
No comments:
Post a Comment